Контроллер полета Matek Mateksys F411 STM32

FC Specifications

• MCU: 100MHz STM32F411CEU6

• IMU: BMI270 (SPI)

• Baro: SPL06-001 (I2C)

• OSD: AT7456E (SPI)

• Blackbox: No

• 2x Uarts

• 2x Full Softserial

• 6x PWM outputs (2x Motors, 4x Servos)

• 1x I2C

• 4x ADC (VBAT, Current, RSSI, AirSpeed)

• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

• Built in inverter on UART2-RX for SBUS input

• Switchable Dual Camera Inputs

• Vbat power ON/OFF switchable for VTX and camera

• PPM receiver: not supported

Power

• 6~30V DC IN (2~6S LiPo)

• 132A Current Sense (Scale 250)

• PDB/Current sense resistor: 90A continuous, 132A burst.

• BEC 5V 1.5A for FC & Peripherals

• BEC Vx 5A for servos, 5V/ 6V option

• Vbat for VTX and camera (ON/OFF switchable)

• LDO 3.3V 200mA

• Battery Voltage Sensor: 1k:10k

FC Firmware

• INAV Target: MATEKF411TE ( INAV4.1 or newer)

Physical

• Dimensions: 31 x 26 x 16.5 mm

• Mounting: 22 x 22mm, Φ2mm

• Weight: 10g

Including

• 1x FC F411-WTE

• Dupont 2.54 pins  (Board is shipped unsoldered)

•